Hyzom Extender Setup​: A Complete Guide

Internet- we cannot imagine our lives without. We need a smooth wireless connection for several personal and professional activities. In every office and home, people are surfing internet using WiFi. Many a times we face issue with the connectivity. Especially when the area is larger than the network coverage. Certain areas turn into no network or dead zones. These areas restrict internet coverage and we face problems. Therefore, to solve this issue, a device called network extender is used by people. However, several extender devices are available in the market, one of them is Hyzom Extender which is extremely good in performance. This device amplifies your router/ modem signals throughout the area and enhance network coverage. To set this device in your home or office network you need to go through Hyzom Extender Setup process.

Many people think that the process is very daunting but in reality it’s not. You just need proper knowledge about Hyzom Extender Setup. This article will guide you through a detailed setting process and other significant information about the device. You need to walk through each information available till the end of the page.

Hyzom Extender Setup Process

The extender setup process is very easy. It involves a few steps as specified further. You have to follow the guide provided here to do Hyzom Extender Setup:

Unboxing and Initial Setup

Before moving forward, you need to ensure you have all the significant components. In the box of Hyzom Extender you will find

• The Hyzom Extender unit

• An Ethernet cable

• A user manual

After unboxing the device carefully, you need to move ahead and find a position to place the extender device. The position of the Hyzom extender device should be in the middle where you need network coverage from where your modem/ router is placed.

Powering up the extender

Further you need to power up your extender device. To do so you have to connect the Hysom Extender into the power outlet. Switch on the power and power LED should illuminate. This will indicate that the device is on. Wait for a few minutes till the LED stops blinking, then move further for the setup process.

Connection Between Extender and Your Network (Main Setup)

To do the Hyzom Extender Setup you need a client device. A client device can be a laptop or computer or mobile or Tablet. You need a device that is WiFi enabled. For best results you need to connect the device with the same network with which you need to connect your extender. Further detailed steps described by us which you need to follow with different devices:

Using a Computer/ Laptop:

Connect to the Extender's Network:

• Firstly, open your computer’s Wi-Fi settings.

• Thereafter, look for a network named something like “Hyzom_XXXX” and connect to it. This is the extender’s default network.

Access the Extender’s Configuration Page:

• Open a web browser and enter the default IP address for the extender (usually found in the user manual, commonly 192.168.0.1 or 192.168.1.1).

• Press Enter. You should be directed to the extender’s login page.

Log In:

Use the default login credentials (often found in the user manual or on a sticker on the extender). This is usually something like “admin” for both the username and password.

Setup Wizard:

• Follow the on-screen instructions from the setup wizard. It will guide you through connecting the extender to your existing Wi-Fi network.

• Select your router’s network from the list of available networks and enter your Wi-Fi password.

Finalize Configuration:

Once connected, the extender will restart to apply the settings. After a few moments, the Wi-Fi LED should show a stable connection and your setup process is complete at last.

Using a Smartphone or Tablet:

Connect to the Extender’s Network:

• Firstly, go to your device’s Wi-Fi settings.

• Then connect to the “Hyzom_XXXX” network.

Open the Setup Page:

• Open a web browser on your device.

• Thereafter, enter the default IP address for the extender (similar to the computer setup).

Log in and Configure:

• Enter the default login credentials.

• Use the setup wizard to configure your extender. Follow the prompts to select your existing Wi-Fi network and input the password.

Save and Reboot:

At last save the settings and allow the extender to reboot. The Wi-Fi signal strength indicator should confirm a stable connection.

Hence, your Hyzom Extender Setup process has been completed. You can do some additional settings as well to optimize your device network. Note that in case you feel coverage of the network is not proper yet then change the position of the extender. This will enhance the coverage and improve connectivity.

Conclusion

We conclude that the Hyzom Extender Setup process is very simple and easy to follow. But still in case you feel any issue arise in between then you need to connect with an expert. Tech Support Hub will prove to be a perfect companion for your network device. They will assist you with not only the setup process but also you can connect with them for any issue related to the device.